The difference between the front and back of the textile fabrics

(1) Generally, the pattern and color of the front of the fabric are clearer and more beautiful than the reverse.

(2) Fabrics with a grid appearance and color pattern fabrics must have clear frontage patterns.

(3), ribs and embossed fabrics, the front is close and delicate, with a strip or pattern ridges; and the reverse surface is rough, with long float lines.

(4), fluffy fabrics: single-sided fluffy fabrics, plush side for the front. Double-faced fabrics have a clean, neat side that is the front of the fabric.

(5) Observe the fabric side of the fabric. The clean, neat side of the fabric is the front side of the fabric.

(6) Double-layered and multi-layered fabrics, if the warp and weft densities of the front and back surfaces are different, then generally, the frontal fabrics may have larger density or positive materials.

(7) Leno fabrics: The lines are clear and the front side of the skein is positive.

(8) Towel fabric: The side with high density of terry is positive.

(9) Printed fabric: The pattern is clear, and the brighter side is positive.

(10) The whole piece of fabric: In addition to the export products, the general attachment of the manual (trademark) and the cover of the factory inspection seal is the reverse. Most fabrics have obvious differences on the front and back sides, but there are also many fabrics with very similar front and back sides. Both sides can be applied. Therefore, it is not necessary to distinguish between the front and back of such fabrics.